
❑
CONVERTING
BURNERS ON
MODELS EQUIPPED WITH
BURNERS (See
Step 4 if range is equipped with dual burners.)
Burner Head
Orifice Spud
Gas Inlet Tube
—.
1.
Remove grates, burner caps and burner heads.
2. Remove burner bases by unscrewing the 3
small screws in each base.
burner
out.
DO NOT
disconnect the wires from the burner
bases unless the
needs to be raised.
3. With
or 5/16” wrench (depending
on the size of your spuds), remove the 4 brass
spuds.
4. Install orifice spuds
to one of the
following diagrams (see
❑
or
B ),
for
gas or natural gas, depending on which you are
converting to.
❑
Orifice Spuds
orifice spuds are in a small plastic bag packed
with this Use and Care book.
orifice spuds
have a 2-digit number and the Letter “L” on
one side. Each orifice spud will also have 1 or 2
grooves on one side, denoting the location on
the range where it is to be installed.
❑
Orifice Spuds
to Natural Gas:
Natural gas orifice spuds have a 3-digit number
on one side. Each orifice spud will also have 1, 2
or 3 grooves on one side, denoting the location
on the range where it is to be installed.
Front of Range
(continued next page)
45
—