If your model has a door latch, do not lock the oven door with the latch while cooking with the probe. The latch is used
for self-cleaning only.
For many foods, especially roasts and poultry, internal food temperature is the best test for doneness. The
temperature probe takes the guesswork out of cooking foods to the exact doneness you want.
Use of probes other than the one provided
with this product may result in damage to
the probe.
Use the handles of the probe and plug when
inserting and removing them from the food
and outlet.
■
To avoid damaging your probe, do not use
tongs to pull on the cable when removing it.
■
To avoid breaking the probe, make sure food
is completely defrosted before inserting.
■
To prevent possible burns, do not unplug the
probe from the outlet until the oven has cooled.
■
Never leave your probe inside the oven
during a self-cleaning cycle.
■
Do not store the probe in the oven.
The temperature probe has a
skewer-like probe at one end and
a plug at the other end that goes
into the outlet in the oven.
After preparing the meat and placing it on
a trivet or on a broiler pan grid, follow these
directions for proper probe placement.
Insert the probe completely into the meat.
It should not touch the bone, fat or gristle.
For roasts with no bone, insert the probe into
the meatiest part of the roast. For bone-in
ham or lamb, insert the probe into the center
of the lowest large muscle.
Insert the probe into the center of dishes such
as meat loaf or casseroles.
Insert the probe into the meatiest part of the
inner thigh from below and parallel to the leg
of a whole turkey.
How to Set the Upper Oven For Cooking When Using the Probe
Insert the probe into the food.
Plug the probe into the outlet in the
oven. Make sure it’s pushed all the
way in. Close the oven door.
Touch the
Probe
pad.
Touch the number pads to set
the desired internal food or meat
temperature between 100°F and 200°F.
Touch the
Bake
pad.
Touch the number pads to set the
desired oven temperature.
Touch the
Start
pad.
The display will flash if the probe is inserted
into the outlet and you have not set a probe
temperature and touched the
Start
pad.
The display will show
LO
until the internal
temperature of the food reaches 100°F; then
the changing internal temperature will be
shown.
When the internal temperature of the
food reaches the number you have set,
the probe and the oven turn off and the
oven control signals. To stop the signal,
touch the
Clear/Off
pad. Use hot pads to
remove the probe from the food. Do not
use tongs to pull on it—they might
damage it.
To change the oven temperature during
probe cooking, touch the
Bake
pad and then
the number pads to set the new temperature.
■
If the probe is removed from the food before
the final temperature is reached, a tone will
sound and the display will flash until the
probe is removed from the oven.
■
You can use the timer even though you
cannot use timed oven operations while
using the probe.
Plug
Cable
Handles
Using the probe.
(on some models)
16
Operating
Instructions
Safety
Instructions
Car
e
and
Cleaning
Installation
Instructions
Tr
oubleshooting
Tips
Consumer
S
uppor
t
