18
Consumer Support
Troubleshooting T
ips
Care and Cleaning
Operating Instructions
Safety Instructions
Using the convection oven.
How to Set the Oven for Convection Roasting when Using the Probe
(on some models)
The display will flash
PROBE
and the oven
control will signal if the probe is inserted
into the outlet, and you have not set a
probe temperature and touched the
START
pad.
Place the shelf in the lowest position
(A). Insert the probe into the food.
Plug the probe into the outlet in the
oven. Make sure it is pushed all the
way in. Close the oven door.
Touch the
CONVECTION BAKE/
ROAST
pad twice (
ROAST
is
displayed).
Touch the number pads to set the
desired oven temperature.
Touch the
PROBE
pad.
Touch the number pads to set the
desired internal food temperature.
To change the oven temperature during
the Convection Roast cycle, touch the
CONVECTION BAKE/ROAST
pad twice
(
ROAST
is displayed) and then touch the
number pads to set the new desired
temperature.
Touch the
START
pad.
When the oven starts to heat, the word
LO
will be in the display.
After the internal temperature of the
food reaches 100° F., the changing
internal temperature will be shown in
the display.
When the internal temperature of
the food reaches the number you
have set, the probe and the oven
turn off and the oven control signals.
To stop the signal, touch the
CLEAR/OFF
pad. Use hot pads to
remove the probe from the food.
Do not use tongs to pull on itÑ
they might damage it.
CAUTION:
To prevent possible burns, do
not unplug the probe from the oven outlet
until the oven has cooled. Do not store the
probe in the oven.
NOTE:
■
If the probe is removed from the food
before the final temperature is
reached, a tone will sound and the
display will flash until the probe is
removed from the oven.
■
You will hear a fan while cooking with
this feature. The fan will stop when the
door is opened but the heat will not
turn off.
■
You can use the timer even though you
cannot use timed oven operations
while using the probe.
18
Consumer Support
Troubleshooting T
ips
Care and Cleaning
Operating Instructions
Safety Instructions
Using the convection oven.
How to Set the Oven for Convection Roasting when Using the Probe
(on some models)
The display will flash
PROBE
and the oven
control will signal if the probe is inserted
into the outlet, and you have not set a
probe temperature and touched the
START
pad.
Place the shelf in the lowest position
(A). Insert the probe into the food.
Plug the probe into the outlet in the
oven. Make sure it is pushed all the
way in. Close the oven door.
Touch the
CONVECTION BAKE/
ROAST
pad twice (
ROAST
is
displayed).
Touch the number pads to set the
desired oven temperature.
Touch the
PROBE
pad.
Touch the number pads to set the
desired internal food temperature.
To change the oven temperature during
the Convection Roast cycle, touch the
CONVECTION BAKE/ROAST
pad twice
(
ROAST
is displayed) and then touch the
number pads to set the new desired
temperature.
Touch the
START
pad.
When the oven starts to heat, the word
LO
will be in the display.
After the internal temperature of the
food reaches 100° F., the changing
internal temperature will be shown in
the display.
When the internal temperature of
the food reaches the number you
have set, the probe and the oven
turn off and the oven control signals.
To stop the signal, touch the
CLEAR/OFF
pad. Use hot pads to
remove the probe from the food.
Do not use tongs to pull on itÑ
they might damage it.
CAUTION:
To prevent possible burns, do
not unplug the probe from the oven outlet
until the oven has cooled. Do not store the
probe in the oven.
NOTE:
■
If the probe is removed from the food
before the final temperature is
reached, a tone will sound and the
display will flash until the probe is
removed from the oven.
■
You will hear a fan while cooking with
this feature. The fan will stop when the
door is opened but the heat will not
turn off.
■
You can use the timer even though you
cannot use timed oven operations
while using the probe.
18
Consumer Support
Troubleshooting T
ips
Care and Cleaning
Operating Instructions
Safety Instructions
Using the convection oven.
How to Set the Oven for Convection Roasting when Using the Probe
(on some models)
The display will flash
PROBE
and the oven
control will signal if the probe is inserted
into the outlet, and you have not set a
probe temperature and touched the
START
pad.
Place the shelf in the lowest position
(A). Insert the probe into the food.
Plug the probe into the outlet in the
oven. Make sure it is pushed all the
way in. Close the oven door.
Touch the
CONVECTION BAKE/
ROAST
pad twice (
ROAST
is
displayed).
Touch the number pads to set the
desired oven temperature.
Touch the
PROBE
pad.
Touch the number pads to set the
desired internal food temperature.
To change the oven temperature during
the Convection Roast cycle, touch the
CONVECTION BAKE/ROAST
pad twice
(
ROAST
is displayed) and then touch the
number pads to set the new desired
temperature.
Touch the
START
pad.
When the oven starts to heat, the word
LO
will be in the display.
After the internal temperature of the
food reaches 100° F., the changing
internal temperature will be shown in
the display.
When the internal temperature of
the food reaches the number you
have set, the probe and the oven
turn off and the oven control signals.
To stop the signal, touch the
CLEAR/OFF
pad. Use hot pads to
remove the probe from the food.
Do not use tongs to pull on itÑ
they might damage it.
CAUTION:
To prevent possible burns, do
not unplug the probe from the oven outlet
until the oven has cooled. Do not store the
probe in the oven.
NOTE:
■
If the probe is removed from the food
before the final temperature is
reached, a tone will sound and the
display will flash until the probe is
removed from the oven.
■
You will hear a fan while cooking with
this feature. The fan will stop when the
door is opened but the heat will not
turn off.
■
You can use the timer even though you
cannot use timed oven operations
while using the probe.
18
Consumer Support
Troubleshooting T
ips
Care and Cleaning
Operating Instructions
Safety Instructions
Using the convection oven.
How to Set the Oven for Convection Roasting when Using the Probe
(on some models)
The display will flash
PROBE
and the oven
control will signal if the probe is inserted
into the outlet, and you have not set a
probe temperature and touched the
START
pad.
Place the shelf in the lowest position
(A). Insert the probe into the food.
Plug the probe into the outlet in the
oven. Make sure it is pushed all the
way in. Close the oven door.
Touch the
CONVECTION BAKE/
ROAST
pad twice (
ROAST
is
displayed).
Touch the number pads to set the
desired oven temperature.
Touch the
PROBE
pad.
Touch the number pads to set the
desired internal food temperature.
To change the oven temperature during
the Convection Roast cycle, touch the
CONVECTION BAKE/ROAST
pad twice
(
ROAST
is displayed) and then touch the
number pads to set the new desired
temperature.
Touch the
START
pad.
When the oven starts to heat, the word
LO
will be in the display.
After the internal temperature of the
food reaches 100° F., the changing
internal temperature will be shown in
the display.
When the internal temperature of
the food reaches the number you
have set, the probe and the oven
turn off and the oven control signals.
To stop the signal, touch the
CLEAR/OFF
pad. Use hot pads to
remove the probe from the food.
Do not use tongs to pull on itÑ
they might damage it.
CAUTION:
To prevent possible burns, do
not unplug the probe from the oven outlet
until the oven has cooled. Do not store the
probe in the oven.
NOTE:
■
If the probe is removed from the food
before the final temperature is
reached, a tone will sound and the
display will flash until the probe is
removed from the oven.
■
You will hear a fan while cooking with
this feature. The fan will stop when the
door is opened but the heat will not
turn off.
■
You can use the timer even though you
cannot use timed oven operations
while using the probe.
For best results when roasting large
turkeys and roasts, we recommend
using the probe included in the
convection oven.
