TURN OFF POWER
Turn off power at the circuit breaker or remove
fuses to the cooktop branch circuit.
CONNECT TO JUNCTION BOX
With the cooktop in place, open the cabinet
door and complete the electrical connections
to the junction box. When making the wire
connections, use the entire length of conduit
provided.
The conduit must not be shortened.
CONNECT LEADS
Connect the red and black leads from the
cooktop conduit to the corresponding leads
in the junction box.
ELECTRICAL CONNECTIONS
6
Installation Instructions
D
D2
D4
D1
D6 SPECIAL GROUNDING
INSTRUCTIONS
• When connecting to a 4-conductor
branch circuit
• When local codes do not permit grounding
through neutral
• When installing cooktop in a mobile home
Attach the appliance grounding lead
(green or bare copper) to the residence
grounding conductor (green or bare
copper) in accordance with local codes.
Ground
Red
Black
INSERT WIRES
Insert the wires from the conduit through the
opening of the junction box.
D3
IMPORTANT:
If the cooktop
is being installed into a blind counter
(one with no cabinet opening below),
wire connections must be made before putting
the cooktop into the cutout opening.
Red
Ground
wire
location
Black
SECURE WIRES TOGETHER
Once the connections are made, secure the
wires together using wire nuts.
D5
The bare ground wire in the conduit is
connected to the cooktop frame. When
connecting to a 3 conductor branch circuit, if
local codes permit, connect the bare ground
connector lead of the cooktop to the branch
circuit neutral (gray or white in color).
Red
Black
Ground
