GE IS200ADIIH A Series, Руководство пользователя

Страница: 6 / 20

••••
Auxiliary Drive to ISBus Interface Board IS200ADII GEI-100305
6
Table 4. Boolean Signals
Request Bits
Innovation Series
bit # Innovation
Series
Mnemonic AcDc2000 Feedback Bits
AcDc2000
bit # Innovation
Series
Mnemonic Innovation
Series
0 Heartbeat ref, lan LAN_HTBT_REF AUXCMD00 0 AUXFB00 LAN_HTBT_FBK Heartbeat fbk, lan
1 Fault reset req, lan LAN_FLT_RST SOFTRES 1 NOFAULT NO_FLT No faults active
2
Trip request, lan LAN_TRP_REQ CFGCMD32 (V.1422)
2
TRIPFLT TRIP_FLT Trip fault active
3 Alarm request, lan LAN_ALM_REQ CFGCMD33 (V.1423) 3 AUXFBW32.0 LOC_FLT Local Fault string
4 Undefined   4 AUXFBW32.1 SYS_FLT System fault string
5 Undefined   5 AUXFBW32.2 RUN_RDY Ready to Run
6
Undefined
  6
MPWRENAB BRG_PWR_ENB Bridge is on
7 Undefined   7 RUNNING RUNNING Running
8 Run request, lan LAN_RUN_REQ RUNRQ (V.650) 8 RUNACT RUN_ACT Run Active
9 Jog request, lan LAN_JOG_REQ JOGRQ (V.651) 9 JOGACT JOG_ACT Jog Active
10
X stop request, lan LAN_XSTP_REQ CFGCMD34 (V.1424)
10
AUXFBW32.3 X_STP_CMD X stop active
11 Full flux req, lan LAN_FFLX_REQ CFGCMD35 (V.1425) 11 AUXFBW32.4 FLX_ENB_STAT Flux enable status
12 Rev mode req, lan LAN_REV_REQ REVCMD (V.675) 12 AUXFBW32.5 REVERSE Reverse mode
active
13 Torque mode req, lan LAN_TREF_ENB CURFOLRQ (V.684) 13 AUXFBW32.6 TRQ_MODE_ACT Torque mode
active
14 Droop disab req, lan LAN_DRP_INH BIASDINH (V.724) 14 AUXFBW32.7 SPD_MODE_ACT Speed mode active
15 Trq lim 2 sel, lan LAN_TLIM_SEL RCLILIM (V.695) 15 AUXFBW32.8 TRQ_LIM_ACT In cur or trq limit
16 Ramp rate 2 sel, lan LAN_RMP_SEL ALTRAJSU (V.643) 16 AUXFBW32.9 LOCAL_MODE Local mode active
17 Ramp hold req, lan LAN_RMP_HOLD HOLDSPD (V.699) 17 AUXFBW32.10 MA_ENB_STAT MA cont enable stat
18
Auto mode req, lan LAN_AUTO_REQ AUTOCMD (V.683)
18
Undefined
 
19 Undefined   19 ZEROSPD ZERO_SPD Zero speed active
20 Undefined   20 Undefined  
21 Undefined
 
21 Undefined
 
22 Undefined   22 Undefined  
23 Undefined   23 Undefined  
24 GP lan req bit 1 LAN_B01_REQ AUXCMD01 (V.661) 24 (EE.781) AUXFB01 LAN_B01_ADR LAN_B01_ADR
25
GP lan req bit 2 LAN_B02_REQ AUXCMD02 (V.662)
25
(EE.782) AUXFB02 LAN_B02_ADR LAN_B02_ADR
26 GP lan req bit 3 LAN_B03_REQ AUXCMD03 (V.663) 26 (EE.783) AUXFB03 LAN_B03_ADR LAN_B03_ADR
27 GP lan req bit 4 LAN_B04_REQ AUXCMD04 (V.664) 27 (EE.784) AUXFB04 LAN_B04_ADR LAN_B04_ADR
28 GP lan req bit 5 LAN_B05_REQ AUXCMD05 (V.665) 28 (EE.785) AUXFB05 LAN_B05_ADR LAN_B05_ADR
29 GP lan req bit 6 LAN_B06_REQ AUXCMD06 (V.666) 29 (EE.786) AUXFB06 LAN_B06_ADR LAN_B06_ADR
30
GP lan req bit 7 LAN_B07_REQ AUXCMD07 (V.667)
30
(EE.787) AUXFB07 LAN_B07_ADR LAN_B07_ADR
31 GP lan req bit 8 LAN_B08_REQ AUXCMD08 (V.738) 31 (EE.788) AUXFB08 LAN_B08_ADR LAN_B08_ADR
Notes:
For CFGCMDx reference bits to be active, drive EE.762.8 (LDRVJP.8) must be set.
For AUXFBW32.x feedback bits to be active, drive EE.5626 (AUXFBJP) must be set to 3 (bits .1 & .0 must be set).