GE Innova 2100-IQ, Руководство по предварительной установке

Страница: 208 / 220

Innova 2100-IQ, 3100/3100-IQ, 4100/4100-IQ Cardiovascular Imaging System Pre-Installation Manual
GE Healthcare Direction 5314528-2-1EN, Revision 1
2 Tools and Test Equipment
Refer to Table 7-2 . To obtain a list of tools and test equipment for components not specified
in Table 7-2 , refer to the appropriate component Pre-Installation Manual listed in Chapter 2,
Section 3, Basic Innova LC System Compatability.
Table 7-2:
PRODUCT OR
COMPONENT
TOOL OR TEST
EQUIPMENT
USED FOR SOURCE
RECEIVED (DATE)
Service Engineer's Tool
Case General Use
Level, Protractor Type Positioner Checks
Plumb Line included in
46-216640G1 Positioner Checks
Torque Wrench 2 to 20
daN.m (15 ft. lbs. to 150
ft. lbs.) Positioner Checks
1/2 inch Ratchet Wrench
(2) Raise and Lower
Positioner shipping dolly
Wrench, Spanner
(46-176584P1) High Voltage Cable
Installation
Innova LC Positioner
Laptop Computer
(MS-DOS Windows) Positioner Configura-tion
and Calibration
Status Display Same as for Innova LC (Service Engineer's Tool Case)
Same as for Innova LC (Service Engineer's Tool Case) Fill in any additional tools or test equipment as required Omega/Tilt Table
Same as for Innova LC (Service Engineer's Tool Case) Fill in any additional tools or test equipment as required C2 Cabinet
Same as for Innova LC (Service Engineer's Tool Case) Fill in any additional tools or test equipment as required X-Ray Head
Same as for Innova LC (Service Engineer's Tool Case) Fill in any additional tools or test equipment as required
Same as for Innova LC (Service Engineer's Tool Case) Fill in any additional tools or test equipment as required
C1 Cabinet
Ethernet adaptation kit for
laptop 2128794 General use (to be
ordered before delivery of
system)
DL User parts
208 2 Tools and Test Equipment