manualshive.com logo in svg

GE IC3645SR4T405E1, Инструкция по установке и эксплуатации

GE IC3645SR4T405E1 - Продукт, который требует качественной установки и правильной эксплуатации. Вы можете найти подробное руководство по установке и эксплуатации этого продукта, а также скачать его бесплатно с нашего сайта. manualshive.com - ваш надежный источник всех необходимых руководств.

Поделиться
Скачать
background image

INSTALLATION AND OPERATION MANUAL 

IT TRANSISTOR CONTROL 

 

 

Page 

46

 

Section 6.  DASH DISPLAYS 
 
Section 6.1  Application 

 
The SX family Standard and Interactive Dash 
Displays allow the operator and maintenance 
personnel easy access to truck operation information 
and real-time system diagnostics of the controller, 
motor and various accessories.  Hourmeter readings, 
battery discharge information, maintenance 
information and system status codes are clearly 
displayed during startup and running modes.  
Shielded cable connections are made to the Dash 
Display by means of five (5) 22-gage wires to the “Y” 
Plug of the traction and hydraulic pump controls. 
 

Section 6.2  Standard Dash Displays 

The GE Standard Dash Display is a four segment 
Light Emitting Diode (LED) instrument that displays 
the GE LX, ZX, and SX Status Codes, Hourmeter 
Readings, Battery Discharge Indication, and 
Maintenance Required Code.  The four LED's above 
the symbols indicate the active readout mode. 
 

Section 6.3  Interactive Custom Dash Displays

 

The Interactive Custom Dash Display allows the 
operator to select the best vehicle performance for 
changing factory (task) conditions.  There are four (4) 
“operator interaction modes” that can be selected by 
depressing a push-button on the dash display.  
 
From the Dash Display, the operator may select any 
of four pre-set interactive modes consisting of (4) 

Controlled Acceleration levels, (4) Field Weakening 
Pick Up levels and (4) Speed Limit levels. 

g

GE Electric Vehicle
Motors & Controls

+

-

BATTERY

+

-

PUSH

PUSH

EVT100ZX

 
These interactive modes are “pre-set” using the 
Handset (Functions 48 - 63) or a personal computer 
(Functions 97 - 112). This feature allows the operator 
to select the best vehicle performance for changing 
factory (task) conditions.  
 
The Custom Dash Display incorporates all the 
features and functions of the Standard Dash Display, 
in addition to the following customer options: 
 

• 

LED graphics to display Battery Discharge 
Indication status. 

• 

Various LED indicators for Maintenance Required 
Status Codes. These can include options for 
traction, pump and power steer motors, hourmeter, 
over-temperature, seat belt, brake and other safety 
sensors. 

• 

A push-button associated with the four segment 
LED that displays Status Codes can be used to 
scroll the last 16 “Stored Status Codes” that shut 
down vehicle operation with a PMT fault. 

 

Connections 

Connections are made to the Dash Display with  five 
(5) 22-gage wires to Plug "Y" of each control. 
Shielded cable is required to eliminate signal 
interference. 

 
Part Number 
 

IC3645LXTDD

T

3

T=Traction Only
P=Traction & Pump

3=Round Face with four
    display symbols

For Custom Dash Displays,
contact your vehicleOEM.

 

 

 

   

 

Reference 

AMP#102241-3 Dash Display mating plug 
AMP#1-87195-8 

Dash Display mating pin 

44A723596-G09 

Dash Display plug kit 

AMP#776273-1 "Y" Plug 
AMP#770854-1 "Y" Plug receptacle 
44A723596-G16 

“Y” Plug Kit 

 

November 2005 

Содержание IC3645SR4T405E1



















































Отзывы:

Нет отзывов

Похожие инструкции для IC3645SR4T405E1

FATEK FBs-1HLC Operation Manuals preview
FBs-1HLC
Бренд: FATEK Страницы: 10
Union Instruments CWD2005 SPC Operating Instructions And Safety Notes preview
CWD2005 SPC
Бренд: Union Instruments Страницы: 63
Vacon 100X series Installation, Technical And Maintenance Manual preview
100X series
Бренд: Vacon Страницы: 132
Parker CK5-DN Quick Start Manual preview
CK5-DN
Бренд: Parker Страницы: 4
Abocom AM7221 User Manual preview
AM7221
Бренд: Abocom Страницы: 10
Tamiya TLU-02 Quick Start Manual preview
TLU-02
Бренд: Tamiya Страницы: 5
Vaniman 96073 Quick Start Manual preview
96073
Бренд: Vaniman Страницы: 2
Idesco 9CD 3.0 User Manual preview
9CD 3.0
Бренд: Idesco Страницы: 7
LAMBERTI ELEKTRONIK Latherm HZR Comfort Operating Manual preview
Latherm HZR Comfort
Бренд: LAMBERTI ELEKTRONIK Страницы: 16
3M Touch Screen Controller SX112 Reference Manual preview
Touch Screen Controller SX112
Бренд: 3M Страницы: 33
Velux KLC 410 Manual preview
KLC 410
Бренд: Velux Страницы: 20
ez-wheel SWD Starter Kit Instruction Manual preview
SWD Starter Kit
Бренд: ez-wheel Страницы: 30
Neles Metso T2 Series Installation Maintenance And Operating Instructions preview
Metso T2 Series
Бренд: Neles Страницы: 16
Parker Hauser COMPAX-M Series Interface Manual preview
Hauser COMPAX-M Series
Бренд: Parker Страницы: 84
Eagle Tree Systems Guardian 2D/3D Stabilizer Manual preview
Guardian 2D/3D Stabilizer
Бренд: Eagle Tree Systems Страницы: 13
Danfoss VLT 6000 HVAC Operating Instructions Manual preview
VLT 6000 HVAC
Бренд: Danfoss Страницы: 44
jbc NAE Series Instruction Manual preview
NAE Series
Бренд: jbc Страницы: 16
Fastech Ezi-Step II Plus-E User Manual preview
Ezi-Step II Plus-E
Бренд: Fastech Страницы: 68

Бренды по названию

Популярные бренды

Загрузить еще бренды