GE IC3645SR4R404U2, Инструкция по установке и эксплуатации

Страница: 54 / 68

ADJUSTABLE FEATURES
SX TRANSISTOR CONTROLS
Page 54
October 1998
Min Max Set
Resolution
Per unit value
Example
If set at 20
450A 1260A 0 to 250 3.24 amps 515 amps
300A 700A 0 to 250 1.6 amps 332 amps
FUNCTION 7 MIN. FIELD CURRENT
( Push 7 )
This function allows the adjustment of the field weakening
level in order to set the top speed of the motor.
Resolution Example
Min Max Set Per unit value If set at 71
0 20 51 to 176 0.16 amps 3.2 amps
0 30 51 to 255 0.16 amps 3.2 amps
0 40 51 to 255 0.185 amps 3.7 amps
0 50 51 to 210 0.314 amps 6.28 amps
0 60 51 to 255 0.314 amps 6.28 amps
Important Note: The function is used to optimize motor and
control performance and this setting will be determined by
GE and OEM engineers at the time of vehicle development.
This setting must not be changed by field personnel without
the permission of the OEM.
FUNCTION 8 MAX FIELD CURRENT
( Push 8 )
This function allows for the adjustment of the maximum
field current in order to obtain the maximum torque of the
motor.
Resolution Example
Min Max Set Per unit value If set at 71
0 20 51 to 176 0.16 amps 3.2 amps
0 30 51 to 255 0.16 amps 3.2 amps
0 40 51 to 255 0.185 amps 3.7 amps
0 50 51 to 210 0.314 amps 6.28 amps
0 60 51 to 255 0.314 amps 6.28 amps
Important Note: The function is used to optimize motor and
control performance and this setting will be determined by
GE and OEM engineers at the time of vehicle development.
This setting must not be changed by field personnel without
the permission of the OEM.
FUNCTION 9
REGEN BRAKING CURRENT LIMIT
(Push 9)
This function allows for the adjustment of the regen braking
current limit.
Resolution Example
Min Max Set Per unit value If set at 20
32 240 0 to 255 0.93 amps 50.6 amps
52 468 0 to 255 1.63 amps 84.6 amps
184 600 0 to 255 1.63 amps 216.6 amps
FUNCTION 10
MAX FIELD CURRENT FOR REGEN
( Push 10 )
This function allows for the adjustment of the maximum
field current to be used during the regen braking mode.
Resolution Example
Min Max Set Per unit value If set at 71
0 20 51 to 176 0.16 amps 3.2 amps
0 30 51 to 255 0.16 amps 3.2 amps
0 40 51 to 255 0.185 amps 3.7 amps
0 50 51 to 210 0.314 amps 6.28 amps
0 60 51 to 255 0.314 amps 6.28 amps
Important Note: The function is used to optimize motor and
control performance and this setting will be determined by
GE and OEM engineers at the time of vehicle development.
This setting must not be changed by field personnel without
the permission of the OEM.
FUNCTION 11 TURN POT SPEED LIMIT
(Push 11)
This function allows for the adjustment of the speed limit
(maximum battery volts to the motor) when the turn
potentiometer voltage is greater than 2.74 volts or less than
1.54 volts.
Range 100% to 0% of battery volts
Set 51 to 180
Resolution 0.78% per set unit
Example: Setting of 71 = 84% of battery
volts
FUNCTION 12
SPEED LIMIT 2
( Push 12 )
This function is operates in the same way as Function 11,
except that it is activated when the turn potentiometer
voltage is greater than 3.08 volts or less than 1.2 volts.
FUNCTION 13 SPEED LIMIT 3
(Push 13)
The SL3 speed limit is activated by the Truck Management
Module fault code 93. See Section 5 for Truck
Management Module details.