Hydran* M2-X Instruction Manual
Page 40
MA-029
Rev. 1.0,
30-Jul-18
Figure 3-8: Typical Screen for Changing Numeric Parameters
•
For alphanumeric parameters, a screen similar to the one shown in Figure 3-9
is displayed. This screen indicates the following information:
•
Current Value
: Current expression of this parameter.
•
New Value
: To set a new expression for this parameter.
Figure 3-9: Typical Screen for Changing Alphanumeric Parameters
2.
Use the Right or Left arrow key to position the cursor on the digit or character
to be changed.
3.
To change
New Value
, there are three possibilities:
•
For numeric parameters, use the Up or Down arrow key to increment or
decrement this digit.
•
For alphanumeric parameters, use the Up or Down arrow key to scroll in
ascending or descending order through the list of available characters.
See Table 3-1.
•
Press the
Delete
context key to eliminate this digit from the value.
Note: Press and hold the Up or Down arrow keys for more than one second to
accelerate the rate of increase or decrease.
4.
Repeat the last step for each digit or character you wish to change. To add
digits or characters, press the Right key past the last digit or character.
5.
Press the
Accept
context key to validate the new value; you can also press
the
Cancel
context key or the
Esc
key to quit the screen and return to the
previous value.
6.
If the new value is validated using the Accept context key, the message
Value
Changed
appears, as shown in Figure 3-10.
Note: Each parameter has a default value. The Hydran M2-X resets each
parameter to its default value when the battery is replaced (see Appendix G) or
when the Hydran M2-X
’s emb
edded software is upgraded (see Appendix F
.
