VII. Software Installation (Windows 98)
Software installation is only required for
Windows
®
98 and 98 SE
users. Users of all other Operating Systems, including Windows
®
NT,
ME, 2000, XP and any Mac
®
OS, may skip this section.
1) Connect the hub to your computer.
2) Windows
®
98 and 98 SE will detect the hub and automatically run
the “Add New Hardware Wizard”.
3) When the initial screen appears introducing the “Add New Hardware
Wizard”, click
Next
.
4) Select “Search for the best driver for your device (Recommended):
and click
Next
.
5) When asked to select a location to search for the drivers, use the
default selection. Do not change the location. Click
Next
.
6) Click
Next
to accept the location the driver will be installed in.
7) On the final screen notifying you that the driver has been installed,
click
Finish
.
Page 10
