GE HGP6070E, Инструкция по использованию и уходу

Страница: 39 / 56

39
Important!
Read the entire manual before using the
oven. The documentation and accessories
are inside the oven. The texts in the manual
correspond to the numbered diagrams.
2. Using the oven
Only the buttons that can be activated will light up.
2.1 Setting the time . When you switch on
the oven, the display will flash (2.1.1). Adjust
the time by pressing or and then press
to validate (2.1.2).
Note: The time will need to be reset if a
power cut occurs.
2.2 Changing the time . Switch on the oven
and press twice. The display will flash
(2.2.1). Change the time by pressing or ,
then validate by pressing (2.2.2).
1. Installation
1.1 Unpacking . Remove all the protective
packaging elements.
1.2 Mains connection . Always take into ac-
count the data on the reference plate (1.2.1)
and the measurements of the cabinet the
oven will be housed in (1.2.2, 1.2.3).
The appliance must be connected to the
mains with a fixed single-phase connection
with the neutral-to-neutral (blue) connection
guaranteed (1.2.4). Fit the oven into the
space and centre it (1.2.5). Make sure there is
no excess cable in the upper part (1.2.6).
Screw it to the fitting using the two screws
supplied (1.2.7).
0. Identification
To find out which model your oven is ("a", "b",
"c" or "d") compare its control panel with the
control panels shown in the illustrations.
Specifications
Rated tension (Volt)
Rated frequency (hertz)
Rated power (Watt) 220-240 V ~
50-60 Hz
3 570 W