manualshive.com logo in svg

GE H48681XB, Руководство по обслуживанию, Страница: 122 / 366

Поделиться
Скачать
GE H48681XB Скачать руководство пользователя страница 122

Further fields should be pre-populated and should not be modified. However, please ensure correct

setting.

-

Enterprise Server URL

 - pre-populated URL

-

Enterprise Tunnel URL

 - pre-populated URL

-

File Repository 

- This path is set by engineering and must not be changed!

-

File Watcher 

- Should always be Enabled!

-

Dir 

- D:\export

-

Filter

 - ensure that this field has the entry "*.zip"

5.

Enter Proxy Configuration (D).
a.

If the customer site does not require a Proxy server, select Disable from the Proxy pull-down

menu and continue with step 7.

b.

If a Proxy server is available, select Enable from the Proxy pull-down menu, enter a valid Proxy

IP Address and Port number.

Note

The information MUST be properly entered, otherwise remote control does not work. There is no possibility

to detect proxy server information automatically.

6.

Click the 

Submit Changes

 button (E) and then close the page.

7.

Reboot.

8.

Reenter the Common Service Desktop (CSD).

9.

Confirm that Service Connectivity is "Configured" and "Checked Out" in the 

Home

 page.

If the system indicates "Checked Out" you can be confident that the system has registered correctly. If

required, verify further connectivity (e.g., remote connectivity using your account) .

10. Close the page and check/create InSite permanent user setting; see 

Section 3.13.4.1 on page 3-78 

.

3.13.4.1 How to create an InSite permanent User

An InSite permanent user is required for automatic system error reporting to the digital service network.
1.

Move the cursor to the InSite ExC link (GE icon) at the right bottom of the display
screen and press the left trackball key (= left-click). The “Contact GE” form is
displayed.

2.

Ensure that Connection is "Checked Out" (1).

Figure 3-76  Contact GE

3.

Select 

Users

 on the top menu (2).

Setup Instructions

3-78

Voluson E-Series Service Manual

KTD106657 Revision 2

Содержание H48681XB















































































































































































































































































































































































Отзывы:

Нет отзывов