GE GSE23GSESS, Инструкция по использованию и уходу

Страница: 24 / 120

Installation Instructions
CONNECTING THE REFRIGERATOR TO
THE HOUSE WATER LINE
(icemaker and dispenser models)
A cold water supply is required for automatic
icemaker and dispenser operation. If there
is not a cold water supply, you will need to
provide one. See “Installing the Water Line”
section.
NOTES:
‡%HIRUHPDNLQJWKHFRQQHFWLRQWRWKH
refrigerator, be sure the refrigerator power
cord is not plugged into the wall outlet.
‡,I\RXUUHIULJHUDWRUGRHVQRWKDYHDZDWHU
filter, we recommend installing one if your
water supply has sand or particles that could
clog the screen of the refrigerator’s water
valve. Install it in the water line near the
refrigerator.
If using GE SmartConnect
™
Refrigerator
Tubing Kit, you will need an additional tube
(WX08X10002) to connect the filter. Do not
cut plastic tube to install filter.
If you are using copper tubing, place a
compression nut and ferrule (sleeve) onto the
end of the tubing coming from the house cold
water supply.
If you are using the GE SmartConnect
™
tubing,
the nuts are already assembled to the tubing.
If you are using copper tubing, insert the end of
the tubing into the refrigerator connection, at
the back of the refrigerator, as far as possible.
While holding the tubing, tighten the fitting.
If you are using GE SmartConnect
™
tubing,
insert the molded end of the tubing into the
refrigerator connection, at the back of the
refrigerator, and tighten the compression nut
until it is hand tight. Then tighten one additional
turn with a wrench. Overtightening may cause
leaks.
1
A
B
Fasten the tubing into the clamp provided to
hold it in position. You may need to pry open
the clamp.
1/4” Tubing
Tubing Clamp
1/4”
Compression Nut
Ferrule
(sleeve)
SmartConnect
™
Tubing
Refrigerator
Connection
C
TURN ON THE WATER SUPPLY
Turn the water on at the shutoff valve (house
water supply) and check for any leaks.
2
PLUG IN THE REFRIGERATOR
Before plugging in the refrigerator, make sure
the icemaker power switch is set to the OFF
position.
See the grounding information attached to the
power cord.
3
INSTALLING THE REFRIGERATOR
(CONT.)
Option 2
24