GE GSD4010, Руководство пользователя, Страница: 22 / 32

Before you call for service…
22
Problem Possible Causes What To Do
Dishes and flatware Inlet water temperature •
Raise the water heater
not clean is below 120°F.
temperature to 120°F.
•
Use
HI TEMP WASH.
Water pressure is
•
Turn on a faucet. Is water
temporarily low
coming out more slowly
than usual? If so, wait until
pressure is normal before
using your dishwasher.
Air gap is clogged •
Clean the air gap.
Improper rack loading •
Make sure large dishware
does not block the
detergent dispenser or the
wash arm.
Spots and filming
Extremely hard water •
To remove stubborn spots
on glasses and
from glassware:
flatware
Low inlet water
1
Remove all metal
temperature
utensils from the
dishwasher.
Overloading the
2
Do not add detergent.
dishwasher
3
Select the
POT SCRUBBER
cycle and
HEATED DRY
Improper loading
option.
4
Start the dishwasher and
Old or damp powder
allow to run for 26
detergent
minutes. Dishwasher will
now be in the main wash.
Rinse agent dispenser 5
Open the door and pour
empty
2 cups (500 ml) of white
vinegar into the bottom of
Too little detergent
the dishwasher.
6
Close the door and allow
to complete the cycle.
If vinegar rinse doesn’t
work: Repeat as above,
except use 1/4 cup (60 ml)
of citric acid crystals
instead of vinegar.
Safety Infor
mation
Operating Instr
uctions
Tr
oubleshooting T
ips
Customer Ser
vice