– 14 –
16
Cycle Signal
Use the Signal pad to change the
volume of the end of cycle signal.
Press the pad until the desired
volume has been reached.
17
or
(depending on model)
Lock Controls or Lock
(depending on model)
Lock the controls to prevent any
selections from being made. Or lock
or unlock the controls after a cycle
has been started.
Children cannot accidentally start the
washer by touching buttons with this
option selected.
To lock the washer, press and hold the
Lock Controls or Lock button for 3
seconds.
To unlock the washer controls, press
and hold the Lock Controls or Lock
button for 3 seconds.
A sound is made to indicate the lock/
unlock status.
The indicator light above the button
will illuminate when the controls are
locked.
NOTE: The Power button can still be
used when the machine is locked.
18
or
(depending on model)
Start/Pause-Add A Garment
Press to start a wash cycle. If the
washer is running, pressing it once
will pause the washer and unlock the
door. It will take a few seconds for the
door to unlock after pressing Pause.
Press again to restart the wash cycle.
NOTE: If the washer is paused and
the cycle is not restarted within 15
minutes, the current wash cycle will
be cancelled.
NOTE: In some cycles the washer will
GUDLQ¿UVWWKHQXQORFNWKHGRRUZKHQ
it is paused.
NOTE: The washer performs
automatic system checks after
pressing the Start button. Water will
ÀRZLQVHFRQGVRUOHVV,WLVQRUPDO
to hear the door lock and unlock
EHIRUHZDWHUÀRZV
19
(appearance will vary
and not all features
on all models)
Display
Displays the approximate time
remaining until the end of the cycle.
NOTE
7KHF\FOHWLPHLVDȺHFWHGE\
the water pressure in the home and
the balance of the load in the washer.
The time remaining on the display
may increase to accommodate
a slower spin speed to handle
unbalanced loads.
On some models, cycle status is also
displayed and certain features such
as Delay Wash or Steam are shown
indicating they have been selected.
Washer Features