GE GFDS375, Руководство пользователя и инструкции по установке, Страница: 5 / 144

Power
Press to “wake up” the display. If the display is active, press to turn the dryer off.
NOTE: Pressing Power does not disconnect the appliance from the power supply.
1
Control settings.
GEAppliances.com
Normal/
Mixed Loads
For loads consisting of cottons and poly-blends.
Cottons
For cottons and most linens.
Bulky/
Bedding
For large coats, bed spreads, mattress covers, sleeping bags, blankets, comforters, jackets, small rugs,
and similar large and bulky items.
Active Wear
Clothing worn for active sports exercise and some casual wear. Fabrics include new technology
finishes and stretch fibers such as Spandex. Also for clothing labeled Easy Care or Perma Press: For
wrinkle-free and permanent press items.
Delicates For lingerie and special-care fabrics.
Speed Dry or
Quick Dry
For small loads that are needed in a hurry, such as sports or school uniforms. Can also be used if the
previous cycle left some items damp, such as collars or waistbands.
Towels/Sheets
Use for towels OR sheets. It is not recommended to mix towels and sheets in the same load.
Sanitize
Reduces certain types of bacteria by 99.8%, including: Staphylococcus aureus, Pseudomonas
aeruginosa, and Klebsiella pneumoniae. The antibacterial process occurs when high heat is used
during a portion of this drying cycle.
Steam Dewrinkle
Full Loads
Provides 20 minutes of steam drying to assist with dewrinkling clothes.
Ideal for loads left in dryer
for an extended time.
Warm Up
Provides 10 minutes of warming time to warm up clothes.
Air Fluff
Provides 10 minutes of tumbling time without heat.
Time Dry
Use to set your own dry time. Time Dry is also recommended for small loads. To use:
1. Turn dry cycle dial to Time Dry .
2. Increase the drying time by pressing the Add Time button.
Note: This button only increases the time. When max time is reached, pressing the button again
will reset the counter to the lowest setting.
3. Select the Temp .
4. Close the door.
5. Press Start/Pause .
Dry Cycles
The dry cycle controls the length and tumble speed of the drying process. The chart below will help you match the dry
setting with the loads.
2
Models:
GFDS255
GFDS250
1 8 2 7
5 4 3 16
15
6
10 11 12
13 18 19
5