49-3000206 Rev 3
33
Installation Instructions
REVERSING THE DOOR SWING (Optional)
REMOVE, ROTATE AND REPLACE
THE HANDLE AND HINGE INTO
THE OPPOSITE SIDES
•
Lift the handle and the hinge out of the door pockets.
NOTE:
Make sure the latch remains seated inside the
handle. If it moves or falls out, seat it back into place.
•
Rotate the handle and hinge, and replace them
back into the pockets on the opposite sides.
3
REPLACE THE INNER DOOR
•
Replace the inner door frame into the outer door.
•
Replace the 14 screws into the inner door, using a
Phillips-head screwdriver, securing it to the outer door.
NOTE:
Make sure the gasket is properly seated on
the inner door frame when replaced.
4
REPLACE THE STRIKE PLATE
AND DOOR ASSEMBLY
•
On the opposite side from where removed, replace
the strike plate with its two screws using a T-25 torx
driver.
•
Lift the door assembly into place and secure it onto
the dryer face with its two screws using a 1/4” (6.4 mm)
nut driver.
•
Close the dryer door.
NOTE:
Make sure the door opens and closes
correctly. If not, repeat all steps making sure the
gasket, all parts, and screws are securely seated.
5
Hold the Door and
Replace Hinge Screws
into the Dryer
Replace Strike
Plate and Screws
Содержание GFD55
Страница 125: ...49 3000206 Rev 3 41 Notas NOTAS ...
Страница 126: ...42 49 3000206 Rev 3 NOTAS Notas ...
