17
16
Meter Activation and Battery Change
Meter Activation and Battery Change
1. Turn the
over. Press and slide
the battery cover to open.
GE200 Blood Glucose
Meter
CAUTION
- Please follow the local regulation to properly discard a used battery.
3. Slide the battery cover back until
it snaps into place.
2. Install the batteries. Be sure to
put the batteries in the correct
direction (polarity (+) facing up).
Your
Blood Glucose Meter comes with two CR2032, 3volt, batteries installed. Two new batteries will provide
power to perform approximately 1000 tests under normal use. Press the main button or insert a strip to activate your
meter.
GE200
4. The GE200 Blood Glucose Meter
5. Press any button to exit the self-test and enter Setting Mode.
will enter Self-Testing Mode automatically when replacing the battery (all symbols
will appear on the screen).
6. You must set the time and date when replacing the battery. See Chapter “Setting Up Your Meter - Setting the Date,
Time, and Volume" on page 18. Test results are still stored in the memory.
Содержание GE200
Страница 1: ......