![background image](http://html.mh-extra.com/html/ge/ge006/ge006_manual_19181023.webp)
45
44
Recalling Test Results
1. Press the Main button to switch the screen to Average Mode.
2. On the average screen, use either the Left or Right button to view 1-day, 7-days, 14-days, 30-days,
60-days or 90-days averages.
3. The number shown in the lower right hand corner indicates how many test results have been
calculated.
4. Excluding test results from the average calculation:
You may exclude the test result from average calculation right after each test.
You have to perform this exclusion immediately after the meter displays the reading of your test result.
Press the Right or Left button to choose " " then press the main button to confirm. The test
result is now excluded from averaging.
The GE006 Blood Glucose meter provides several average test results. View the 1-day, 7-days, 14-days,
30-days, 60-days and 90-days average test results for better blood glucose monitoring.
Recalling Average Test Results
5. Quick Searching:
To view test results in sequential order automatically, enter the Memory Mode. Press the Right or Left
button for 2 seconds. (The Right button is for viewing from the most current to the oldest test results.
The Left button is for viewing from the oldest to the most current test results). Release the button to
stop at any particular test result.
NOTE
-
Test results must exist
during the desired time interval. For example: To get a 14-day average on 1/30/14, you
must have test results dated between 1/17 and 1/30. If no test results exist during that time
frame you will not receive an average.
- To exclude test results from average calculation, you need to remain in Test Mode and
perform the exclusion right after you get the test result. Once you move to MEM Mode,
Average Mode or Time Mode, you will not be able to perform the exclusion.
- The "Lo", "Hi" results, control solution test results and test results under abnormal
temperature < 50°F (10°C), > 104°F (40°C) will be excluded from average calculations.
The Average function requires that the correct time and date is set.
Содержание GE006
Страница 1: ......