GE GDWT668V, Техническое обслуживание руководство, Страница: 27 / 41

– 27 –
Caution: When installing the tub gasket, run your
fi nger over the gasket, assuring it is smooth and
even for a proper seal.
Tub Gasket
Channel
3. Remove the dishwasher tub gasket by grasping
an end and peeling it away from the channel.
Tub Gasket
The dishwasher tub gasket prevents water leakage
and fi ts in a channel that lines the rim of the
dishwasher tub. The gasket uses a wire rod that
provides tension to the seal.
To remove the tub gasket:
1. Remove the outer door panel. (See
Outer Door
Panel
.)
2. Pull the wire rod out of the gasket.
Bottom Door Seal
The bottom door seal is riveted to the inner door
panel. To remove the bottom door seal, replace the
inner door panel. (See
Inner Door Panel.)
3. Disconnect the 2 detergent/rinse module wires
and the vent fan wiring harness.
Disconnect
Disconnect
4. If the installation allows, pull the dishwasher out
to access the door hinges.
5. Insert 2 screwdrivers (1 on each side) thru the
door hinge bracket holes and secure them
under the dishwasher tub.
Wire Rod
Gasket
7. Slide the inner door panel off the door hinges.
6. Remove the 4 Phillips-head screws holding the
inner door panel to the door hinges (2 on each
side).