GE GDF510PxJ Series, Техническое обслуживание руководство

Страница: 36 / 73

– 36 –
( Continued next page )
Sump Module
The sump module is front serviceable with the
dishwasher remaining in the installed location. This
section of the guide only covers the sump removal.
Components and diagnostics of the sump module
may be found in the Fill System, Circulate System
or Drain System sections of this guide.
Sump Module Removal
1. Remove power to the dishwasher.
2. Remove the upper and lower racks.
3. Remove the toe kick.
4. Remove the door (see the Door Removal section
of this guide).
5. Remove the lower spray arm (turn the locking
nut counter clockwise).
6. 5HPRYHWKH¿QH¿OWHUYHQWFDSVDQGFRDUVH¿OWHU
(turn counter clockwise to remove).
7. Remove the main conduit (see the Circulation
System section of this guide).
8. Loosen the high drain loop hose clamp (1/4 in.
hex head) and remove the hose from the drain
pump (there will be a small amount of water in
the sump, pump and hose).
9. Disconnect the turbidity sensor wiring (some
models).
10. Unlatch three sump clips. All three latches can
be reached from the front of the dishwasher in
most installations. If the dishwasher does not
have the legs extended, the dishwasher may
have to be removed from its installed position.
High Drain Loop Hose
Disconnect Turbidity Sensor Harness