19
Installation Preparation
Installation Pr
eparation
IF THE REFRIGERATOR CAN NOT PASS THROUGH A DOOR DURING INSTALLATION,
FOLLOW THESE STEPS.
Removing Freezer Door
❈
Remove front bottom cover first, if it is attached.
1 Remove the bottom cover
first. Pull out the left collar of
the coupling first, then hold
the coupling and pull out the
left water tube.
(Dispenser Models Only)
2 Unscrew top hinge cover
with a screw driver.
3 Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect the harness
wires.
4 Lift up the front of hinge to
remove.
(After the hinge is removed
the door can fall down
forward. Be careful !)
5 Be careful not to damage
t h e w a t e r l i n e w h e n
removing the door.
Removing Refrigerator Door
1 Unscrew top hinge cover
with a screw driver.
Insert a thin screw driver into
the side groove of the cover
to remove.
2 Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect harness wires.
3 Lift up the front of hinge to
remove.
(After the hinge is removed
the door can fall down
forward. Be careful !)
4 Lift the door straight up to
remove.