background image

FTP-1000

Installation Manual

10

Appendix A

Specifications and notices

Note:  

See specific panel installation instructions for complete UL installation requirements for the system you are installing.

Radio interferance information to the user

If this equipment causes harmful interferance to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the interferance by one or more of the 
following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the affected equipment and the panel receiver to separate outlets, on different branch circuits.

Consult the dealer or an experienced radio/TV technician help.

Table 4.

Specifications

Specification

Rating

Compatibility

Concord, Concord Express, Concord Ultra, Concord 4

Power requirements

12 VDC nominal, 75 mA

Temperature range

32 to 120°F (0 to 49°C) Operating
-30 to 140°F (-34 to 60°C) Storage

Maximum humidity

85% relative, noncondensing

Dimensions

5 in. x 4.50 in. x 0.75 in. (L x W x D)

UL/cUL listings

UL (985, 1023, 1610)
cUL (C1023 - 1974, S545 - M89)
For cUL listed applications, the unit shall be installed in accordance with 
Part 1 of the Canadian Electrical Code.

Содержание FTP 1000 - Security Concord LCD Touchpad













Отзывы: