GE FQ000040, Руководство по обслуживанию

Страница: 473 / 698

GE
D
IRECTION
FQ091019, R
EVISION
2 V
IVID Q
N S
ERVICE
M
ANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-115
7-6-1-3 PC Doctor
NOTE: For a complete description of all PC Doctor tests, refer to the information in "PC Doctor" on page
7-15 .
This procedures in this section are divided into two groups. Refer to the relevant procedure, as follows:
• Automatic Tests
- Full Back End Test w/o Hard Disk Scan - see below
- "Full PC Doctor Test (50 min)" on page 7-117
- "CPU Tests" on page 7-119
- "HD Test" on page 7-122
- "Memory Test" on page 7-124
- "Video Test" on page 7-126
- "PCI Test" on page 7-128
- "Network Test" on page 7-130
7-6-1-3-1 Full Back End Test w/o Hard Disk Scan
NOTE: For a description of this test, refer to "Full Back End Test without Hard Disk" on page 7-15 .
1.) In the Diagnostic Test window, trackball to Full Back End Test w/o Hard Disk Scan in the list of PC
Doctor tests available for selection from the Diagnostic Test Tree (see Figure 7-80 below ) and press
Set . The Test name is displayed under Execute; the relevant system components to be tested are
highlighted light blue in the Schematic View (BEP, Peripherals, Keyboard), as shown below:
2.) Under the Special Instructions area, activate the Loops checkbox
and select the required number of Loops from the combo box.
3.) Adjacent to On Fail, select either Stop or Continue , as required.
Figure 7-80 Full Back End Test w/o Hard Disk Scan