9
Attaching the Adapter/Charger
1. Slide the
OPEN-BATT button to open
the battery compartment. Carefully
open the compartment fully.
2. Insert the DC connecting cord from
the DC output terminal on the AC
adapter/charger to the DC input
terminal on the camcorder.
3. Close the battery compartment.
4. Plug the AC adapter/charger power
cord into an AC operating outlet.
The adapter/charger’s POWER
indicator lights.
Use an Adapter/Charger or Battery to Supply Power
1
1
2
4
2
2
1
Installing the Battery
The battery pack is not charged and must
be charged before it can be used the first
time. Details are on page 14.
1. Slide the OPEN-BATT button to open
the battery compartment.
2. Insert the battery sideways as shown
and snap into place.
To remove the battery, slide it toward
the back of the camcorder and lift out.
3. Close the battery compartment.
1. Remove lens cap and attach the cord
to the lens cap.
2. Pull up the flap, run the cord through
the A/V terminal cover,and attach to
the handstrap.
3. Adjust the strap for comfort, attach the
lens cap cord, and then close the flap.
Tips: Make sure the end of the strap is
positioned securely before closing the flap.
The lens cap can be clipped onto the handstrap.
2
1
3
Attach Lens Cap Cord and Adjust Handstrap
All manuals and user guides at all-guides.com
