Consumer Support
Troubleshooting T
ips
Operating Instructions
Safety Instructions
7
About cycle options.
GEAppliances.com
SIGNAL
Alerts you when the cycle is complete.
On some models, press
SIGNAL
to turn the beeper on or off.
2ND RINSE
Adds a second rinse to any cycle.
EXTEND SPIN
Extends the last spin of a wash cycle. This will extract more water from your clothes.
Clothes will be drier when you use this option.
DELAY 1-8 HOURS
(on some models)
Use to delay the start of your washer for 1 to 8 hours. First choose your wash cycle and
any options. Then press this pad for the number of hours you want to delay the cycle.
Press the
START
pad to start the countdown.
The countdown time will be shown in the
Est. Time Remaining
display.
Auto Balance
(on some models)
The
Auto Balance
feature senses the wash load distribution for an even spin. Models
with
Auto Balance
have an indicator light that tells you when the feature is active.
About other features.
The cycle status indicator lights display what part of the cycle the washer is in.
PerfecTemp Plus
PerfecTemp Plus
senses the incoming water temperature and adjusts the temperature
of the fill water.
The lid must be closed for
PerfecTemp Plus
to work.
If your water is too cold, detergent will not dissolve effectively and clothes may not get
clean. If the water is too hot, fabrics could be damaged.
PerfecTemp Plus
adjusts these water temperature extremes for better washing
performance.
You may hear the water valves turning off and on while the water temperature is being
adjusted. This is normal.
Some models have an indicator light that tells you when
PerfecTemp Plus
is active.
Appearance may vary.
Cycle Status Indicator Lights