Proprietary
–
See Copyright Page
17
e-terra
powercom
v2 Installation Manual
5.3
BPL Signal Interface
5.3.1
Overall description
BPL transceiver is linked to a pair of BPL ports through:
-
a selectable High Frequency filter
-
a configurable splitter / combiner
Selectable filter
Splitter /
Combiner
BPL 1
BPL 2
BPL
transceiver
Note
: BPL transceiver already has an HF filter covering the full band [1
–
34 MHz]
5.3.2
Selectable Filter
Depending on the configuration of the mother board (see Annex for details) two filter positions are available
for manual selection using the top panel switch.
Warning:
positions 1 and 2 have been inverted on earlier production batches (those without the danger sign
on BPL port). In this document, please refer to the picture above and consider position 1 as front position and
position 2 as rear.
