GE DISPOSALL GFC365, Руководство пользователя и инструкции по установке

Страница: 12 / 44

12
49-4000291 Rev 0
Problem Possible Cause What To Do
Loud noises (other
than those during
grinding of bones
and fruit pits)
6LOYHUZDUHERWWOHFDSRURWKHUIRUHLJQREMHFWKDVIDOOHQ
into the disposer
Remove the splash guard and remove the
REMHFWZLWKORQJKDQGOHGWRQJV5HSODFH
the splash guard.
Disposer does not
start
Reset button has been tripped With the splash guard removed, check to see
if the turntable will move freely using a broom
handle. If the turntable moves freely, replace
the splash guard and check the reset button
to see if it has been tripped.
7KHUHVHWEXWWRQ
is red, located opposite the discharge elbow,
near the bottom of the disposer behind
its protective shield. Reach up and under
the protective shield and push the button
in until it clicks and remains depressed. If
the reset button has not been tripped, check
for a shorted or broken wire connecting to
the disposer. Check the electrical power
switch, fuse box or circuit breaker. If wiring
and electrical components are intact,
the unit may have internal problems that
require service or replacement.
7XUQWDEOHFDQQRWURWDWH
If the turntable does not turn freely, check
IRUDQREMHFWORGJHGEHWZHHQWKHWXUQWDEOH
DQGWKHJULQGULQJ'LVORGJHWKHREMHFWE\
moving the turntable with a broom handle.
7KHQUHPRYHWKHREMHFW
,IQRIRUHLJQREMHFWLVSUHVHQWWKHUHPD\
be internal problems.
Disposer leaks If the leak is at the top, it may be caused by:
1. Improper seating of sink flange (gasket choice, putty,
or tightening.
2. Support ring not tightened properly.
'HIHFWLYHFXVKLRQPRXQW
If the leak is at the discharge elbow, leak may be
caused by improper tightening of elbow flange screws.
TROUBLESHOOTING TIPS
Troubleshooting Tips... Before you call for service
SAFETY NOTE: Before investigating, you must disconnect the power supply.
WARNING
Before resetting, disconnect the power supply-please see SAFETY NOTE above. The
overload control prevents the motor from operating should overloading occur. This feature
protects your house wiring and your disposer. When overloaded, the motor will stop automatically.
Remove
Splash
Guard
7XUQWDEOH
Reset Button
(Reach up and
under protective
shield to press)
Reset Button
(Reach up and under
protective shield to press)
6HULDO1R
(Located on the bottom
of the disposer)