GE DigitalFlow XGS868i, Руководство по программированию

Страница: 128 / 176

Appendix C. Programming the XGS868i Using PanaView™
118 DigitalFlow™ XGS868i Programming Manual
Note:
The measurement units that appear in these prompts are those selected in the
Global-System
menu earlier in
this section.
Analog Outputs (cont.)
5. Enter a flow rate value for the Zero (low) end of the analog output range and click
[Next Item]
.
6. Enter a flow rate value for the Full (high) end of the analog output range and click
[Next Item].
After responding to the above prompt, the meter returns to step 1. Click
[Exit Page]
to proceed to another menu or
option.
DeltaT S
2
Displays Skan Delta T. N.A. N.A.
UP Transit M
2
Displays Measure transit time upstream. N.A. N.A.
DN Transit M
2 Displays Measure transit time downstream. N.A. N.A.
DeltaT M
2
Displays Measure Delta T. N.A. N.A.
Vinst Displays the instantaneous velocity. N.A. N.A.
T Saturat Displays saturation temperature for steam at current pressure. N.A. N.A.
T Superht
Displays actual temperature minus the saturation temperature
(Tactual – Tsat).

0 <0
Fluid Dens Displays fluid density. N.A. N.A.
T Kelvin Displays the current process temperature in °K. N.A. N.A.
kiloPascals Displays the current process pressure in kPa N.A. N.A.
Steam Quality
Displays the steam quality from a live input or a static
programmed value.
0.0 – 1.0 <0.0 or >1.0
1
available only if Multi K-factors = ON
2
available only if Burst Mode = S/M
Table 27: Available Measurement Parameters (cont.)
Option Bar Description Good Bad