GE DigitalFlo XGM868i, Руководство по обслуживанию

Страница: 64 / 80

Appendix B. Calibration and Testing with PanaView
56 DigitalFlow™ XGM868i Service Manual
B.5.3b NVR Test (cont.)
Figure 15: Completion of the NVR Test
B.5.3c RAM Test
To check the RAM:
Note:
If you are in the Hardware Test option, skip to step 2.
1. From the left pane of the Calibration/Test window, double-click on Hardware Test .
2. In the center pane, double-click on RAM TEST .
3. The right pane displays the RAM Value, along with an indication as to whether the RAM is functioning. Click
[Next
Item]
or
[Exit Page]
to return to the Hardware Test option, and
[Exit Page]
again to return to the main
Calibration/Test menu.
B.5.3d FIFO Test
To check the FIFO:
Note:
If you are in the Hardware Test option, skip to step 2.
1. From the left pane of the Calibration/Test window, double-click on Hardware Test .
2. In the center pane, double-click on FIFO TEST .
3. In the right pane, a message lists the desired number of bits, along with the approximate bias and the average
sample. Click
[Next Item]
to perform the test and return to the Hardware Test option, and
[Exit Page]
again to
return to the main Calibration/Test menu.