GE Digital Radiant Cooktop, Инструкция по использованию и уходу

Страница: 15 / 24

15
Glass Cooktop Cleaning
Halogen/Radiant Cooktop
Normal
cleaning
Use only a recommended cleaning cream, such
as Cerama Brite or another cooktop cleaning
cream, on the glass cooktop.
To maintain and protect the surface of your
new glass cooktop follow these steps.
1.
Before you use the cooktop for the first time,
clean it with cleaning cream. This helps
protect the top and makes clean-up easier.
2.
Clean the surface with the cleaning cream
after each use.
3.
Rub a few drops (less is better) of the
cleaning cream onto soiled area using a
damp paper towel. Buff with a dry paper
towel until all soil and cream are removed.
Heavy,
burned
on soil
1.
Allow the cooktop to cool.
2.
Apply a few drops of cleaning cream to the
cool, soiled area. Spread the cream across the
entire soiled area.
3.
Hold scraper at a 45° angle against the glass
ceramic surface. This 45° angle makes the
scraping easier.
4.
Scrape soil with the enclosed razor scraper.
Keep small amount of cream on the soil
as you scrape. Heavily soiled areas may
require repeated applications of cream. It will
be necessary to press down on the razor
scraper while scraping the soiled area with
cooktop cream.
Be sure to use a new sharp razor scraper.
Do not use a dull or nicked blade.
5.
If any soil remains, repeat the steps listed
above.
To order more cream and/or scrapers for
cleaning your glass cooktop, please call our toll-
free number:
National Parts Center . . . . .800-626-2002
Cleaner . . . . . . . . . . . . . . . . . .
# WX10X300
Scraper . . . . . . . . . . . . . . . . . .
# WX5X1614
Cream & scraper kit . . . . .
# WB64X5027
General
information
Clean the glass surface with cleaning cream
before you use the cooktop for the first time.
Also, clean the glass surface after each use.
This helps protect the top and makes clean-up
easier.
To clean the cooktop seal around the edge of
the glass,
let a wet cloth rest on it for a few
minutes, then wipe clean. Use a mild detergent
if needed.
Do not use a knife or any sharp object on the
seal because it will cut or damage it.
NOTE: Using a razor scraper will not damage the
surface if the 45° angle is maintained.