33
NOTE: If there is no answer within 2 minutes after transferring the call,
then both units receive a call back notification. If neither unit answers
within 30 seconds, then the external call will be automatically dropped.
Push to Talk
This feature allows you to directly talk to another registered handsets or base by pressing
the
PUSH TO TALK button on either handset or base respectively.
1. Make sure your phone is
OFF (not in TALK mode).
. Press the
PUSH TO TALK button on base or handset.
3. A list of registered handsets and base shows on the display.
4. Use the
5
or
6
button to desired handset or base. The default setting at base is
HANDSET 1
and the default setting at handset is
BASE
.
5. Press the
SELECT (SKL) to save your selection.
6. Press and hold the
PUSH TO TALK button to connect with the desired handset or base.
Intercom Operation
A two-way intercom is possible between the base and cordless handset(s) without
tying up the telephone line and since the telephone line is not used, you can still receive
incoming calls.
Making an Intercom Call
1. Make sure the phone is
OFF (not in TALK mode).
. Press the
int button.
3. Use the
5
or
6
buttons to select the desired handset or base.
NOTE: If you only have one handset registered in the system, it is
paged automatically.
4. Press the
SELECT (SKL).
5. The receiving handset or base is paged, a tone is sounded and the following
information shows in the display:
PAGING
HANDSET 2
EXIT
PAGING FROM
HANDSET 1
OK EXIT
Originating Handset/Base
Receiving Handset/Base
