7
Safety Instructions
Care and Cleaning
Consumer Support
Operating Instructions
Countdown display.
(DMCD models only)
GEAppliances.com
The countdown display shows the remaining operating time as well as the current drying cycle.
The display board is configured for a 45-minute dry time at the factory to correspond with
the 45-minute timer cam pre-installed in the coin box. If the timer cam is modified for another
operating duration, the dip switches on the display board should be set as follows:
NOTE:
This display does not accumulate time. See the following examples of display possibilities.
DIP SWITCH NUMBERS
DRYING TIME (minutes)
1
2
45
1
1
60
1
0
90
0
1
120
0
0
DIP SWITCH SETTING (min)
COIN SLIDE ACTUATIONS
DISPLAY READING (min)
45
1
45 to 0, then blank
45
2
45 to 1, then 1 for next 45 min.,
then 0 and blank
120
1
99 for 21 minutes, then 98 to 0,
then
blank
