GE Datex-Ohmeda Aisys Carestation, Справочное руководство

Страница: 66 / 498

Aisys
2-34 04/08 M1046983
2.10.3 Agent Delivery board LED indicators
LED indicators are provided on the Agent Delivery Board to convey information about
subsystem operation. Refer to the following table and to Figure 2-26.
Note : When a failure has been detected in the eVap, only the +12VP1 power rail will be
powered. The rest are shut off.
Item Marking Indicates Color
1 WDG Blinks if microcontroller active Yellow
2 TXD Blinks if subsystem sending to Anesthesia Control Board Yellow
3 RXD Blinks if subsystem receiving from Anesthesia Control Board Yellow
4 SCV Lit if Scavenge Valve open Yellow
5 OFV Lit if Outflow Valve open Yellow
6 OFZ Lit if Outflow Zero Valve is performing zero measurement Yellow
7 IFZ Lit if Inflow Zero Valve is performing zero measurement Yellow
8 IFV Lit if Inflow Valve open Yellow
9 CPWR Lit if Cassette powered Green
10 P1 Lit if voltage present on +12VP1 power rail Green
11 P2 Lit if voltage present on +12VP2 power rail Green
12 P3 Lit if voltage present on +12VP3 power rail Green
13 P4 Lit if voltage present on +12VP4 power rail Green
14 All segments lit immediately after reset.
Segments flicker during subsystem POST.
Segments extinguished upon communications established with ACB. Red