GE Component Cooktop System Скачать руководство пользователя страница 29

Страница: 29 / 36

The Problem Solver

Component Cooktop System

Questions?
Use this
problem
solver!

PROBLEM

POSSIBLE CAUSE

COMPONENTS

• Difficulty may be in the main distribution panel of your house caused

ARE NOT

by a blown circuit fuse, a tripped circuit breaker, the main fuse or the

FUNCTIONING

main circuit breaker, depending on the nature of the power supply.

PROPERLY

If a circuit breaker is involved, reset it. If the control box uses fuses,
the circuit fuse (a cartridge-type) should be changed,

BUT ONLY

BY SOMEONE FAMILIAR WITH ELECTRICAL CIRCUITS.

If, after performing one of these procedures, the fuse blows or circuit
breaker trips again, call for service.

NOTE:

Apartment tenants or condominium owners should request

their building management perform this check before calling for
service.

• Controls are not properly set or wrong control is set for the component

or surface unit you are using.

• Grill element is not plugged in properly.
• Consider the possibility of interruption in gas or electric service from

the utility source.

HALOGEN/RADIANT

• You must use pans which are absolutely flat. If light can be seen

SURFACE UNITS

between the pan bottom and a straight edge, the halogen/radiant

WILL NOT MAINTAIN

surface units will not transfer heat properly.

A ROLLING BOIL OR

• Pan bottoms should closely match the diameter of the surface unit

FRYING RATE IS NOT

selected.

FAST ENOUGH

HALOGEN/RADIANT

• The halogen/radiant cooktop may seem hotter than you are used to.

COOKTOP FEELS HOT

This is normal.

•

Make sure flat-bottomed pans are used.

• Using the vent will help keep the halogen/radiant cooktop cooler.

FOODS COOK

• Improper cookware being used. Pan bottoms should be flat, fairly

SLOWLY ON

heavy weight and the same diameter as the surface unit selected.

HALOGEN/RADIANT
COOKTOP

TINY SCRATCHES

• Incorrect cleaning methods have been used, cookware with rough

(may appear as cracks)

bottoms have been used or coarse particles (salt or sand) were

OR ABRASIONS ON

between the cookware and the surface of cooktop. Use recommended

HALOGEN/RADIANT

cleaning procedures, be sure cookware bottoms and cookware are

COOKTOP GLASS

clean before use and use cookware with smooth bottoms. Tiny

SURFACE

scratches are not removable but will become less visible in time as a
result of cleaning.

METAL MARKINGS

• Do not slide aluminum cookware across the surface. Use the

(may appear as scratches

recommended cleaning procedure to remove marks.

on halogen/radiant

• Incorrect cleaning materials have been used, encrusted boilovers or

cooktop glass surface)

grease spatters remain on the surface. Use a razor scraper and the
recommended cleaning procedure.

Содержание Component Cooktop System





































Результаты поиска

Содержание Component Cooktop System

Отзывы:

Похожие инструкции для Component Cooktop System

Бренды по названию

Популярные бренды

GE Component Cooktop System, Инструкция по использованию и уходу

Результаты поиска

Содержание Component Cooktop System

Отзывы:

Похожие инструкции для Component Cooktop System

Бренды по названию

Популярные бренды