Window Instillation
Window Requirement
This air conditioner is
prepared for installation in standard
double-hung windows with
.
opening width of
to
●
clear, vertical opening of 17”
minimum from bottom of sash
to stool.
I
For installation in windows with
a minimum opening width of
see page
Note:
supporting parts should
be
to firm wood, masonry
or
Needed
●
Blade-type screwdriver
●
Rule or tape measure
. Hex driver
●
Knife
●
Level
Hammer
Screws
Type A
Type B
1. Remove the Chassis.
Caution: Remove decorative front
by grasping both sides and
pulling forward. Remove screws,
shipping
and save to
Cabinet
Cabinet
Screen
\
I
2. MU
Window.
1. Open the window and mark the
center of the window
Carefully
place the cabinet in the window and
align the center mark on the bottom
tie bar with the center mark on the
window stool.
I
Top Retainer Bar
Bottom
Bar
Slide the chassis out of the cabinet
by pulling the chassis forward while
bracing the cabinet. Remove the
2. Close the window until it touches
screen, if necessary, and replace it
behind the top retainer bar. Do not
after instillation.
close it so tightly that the sliders
cannot move. (Do not release your
grip on the cabinet until the lower
window sash is in its final position.)
3. Attach the cabinet to the window
stool by driving Type A screws
through the cabinet track into the
window stool.
Type A Screw
(continued
