Installation Instructions
Window Installation
1
Insert the cut edge of the filler
panel into the case side seal
groove.
2
Push the filler panel backward
toward the window frame until it
clears the window stool.
3
Slide the filler panel out from the
air conditioner case. Make sure it
contacts the window molding.
4
Use upholstery tacks to attach
the filler panel to the face of the
window molding through the
holes provided.
5
Pull the sliders out until they
contact the face of the window
molding. Pull the window down
tightly and lock it in place with
5
⁄
8
″
screws.
6
Attach the window locking
bracket with a 5
⁄
8
″
screw.
Install the Window
Filler Panels
Attach
Attach through the holes on
each side of the window sash.
Leave a small space at the
bottom of the case side seal
groove.
Case
Case
Window molding
Slide the filler panel into place.
1
Cut the foam top window gasket
to the window width.
2
Stuff the foam between the
glass and the window to prevent
air and insects from getting into
the room.
Install the Window
Gasket
1
Slide the air conditioner into the
case and replace the front grille.
2
Install the two ground/anti-theft
screws removed at the beginning
of the installation.
3
Make sure the unit is
OFF
before
plugging into the outlet.
4
Use the putty to fill in holes or air
leaks.
Replace the Air
Conditioner
12
