1
,QVWDOODWLRQ,QVWUXFWLRQV
ZZZJHVHFXULW\FRP
*(6HFXULW\
'
Product
Summary
These touchpads let you control all programming and operation of compatible security systems
(see the “Specifications” section).
The large 2-line, 16-character displays provide easy to read messages to indicate the current sta-
tus of the system. Both touchpads include police, fire, and auxiliary panic buttons that can be
activated anytime. A built-in sounder provides alarm, status, and button-press sounds. The ATP
2100 includes a swing-down door that reveals the buttons and a label with basic system operat-
ing commands. The ATP2600 has a flip-top that hides the display and covers the buttons when
down. Both touchpads also include menu scroll buttons to the right of the display and a hardwire
contact input.
Tools and Equipment Needed
•
4-conductor, 22- or 18-gauge wire
•
Screwdriver
•
#6 screws and anchors (included)
•
Panhead screws for gang box installation
•
Saw or utility knife for cutting wallboard
Installation
Guidelines
•
Mount the touchpads in an environmentally controlled area (32°F to 120°F/0°C to 49°C).
•
When mounting the ATP2100, allow at least 3 inches below it for the swing-down door.
•
When mounting the ATP2600, allow at least 2 inches above it for the flip-top display.
•
Do not exceed the maximum available power (see panel
Installation Instructions
).
•
Table 1 describes the power used by the touchpads.
•
Table 2 describes the maximum wire lengths allowed between the touchpad and the panel.
0RGHO1R$73
0RGHO1R$73
Table 1: Touchpad Power Usage
Current (mA)
Conditions
165
Maximum alarm current with the
buzzer sounding and the touchpad
illuminated from a button press
110
Typical operation
30
Power saving mode (no panel AC
power)
Table 2: Maximum Touchpad Wire Lengths
Wire Gauge
(Unshielded or
Shielded)
Max. Power & Bus Wire
Length to Panel
Wire Gauge
(Shielded)
Max. Hardwire Input
Wire Length
18
750 feet
18
1000 feet
22
300 feet
22
350 feet
'RFXPHQW1XPEHU5HY&
6HSWHPEHU
$73 $737RXFKSDGV
