11
Instrucciones para la instalación en una ventana
REQUISITOS PARA LA VENTANA
•
Estas instrucciones son para una
ventana estándar de dos pliegues. Usted
necesitará modificar el proceso para otros
tipos de ventanas.
•
El acondicionador de aire puede ser
instalado sin los paneles de acordeón
para ajustarse a una ventana más
estrecha. Ver las dimensiones de la
abertura de la ventana más adelante.
•
Todas las partes de apoyo deben quedar
totalmente aseguradas a algún metal,
mampostería o a la madera.
•
El tomacorriente eléctrico debe estar
al alcance del cable eléctrico del
acondicionador de aire.
1
REQUISITOS DE UNA VENTANA
DE TORMENTAS
Un marco de ventana de tormentas no
permitirá que el acondicionador de aire se
incline hacia el exterior y evitará que drene
apropiadamente. Para solucionar este problema,
adhiera un pedazo de madera a la repisa.
PEDAZOS DE MADERA–
ANCHO: 2
″
LONGITUD:
Lo suficientemente largo
como para ajustar en el interior del marco
de la ventana.
GRUESO:
Para determinar el grueso, coloque
un pedazo de madera en la repisa para
hacerla 1/2
″
más alta que la parte superior
del marco de la ventana de tormentas.
Péguelo firmemente con clavos o con
tornillos proporcionados por el instalador.
1/2
″
más
alto que
el marco
Marco de
ventana de
tormentas
Madera
Repisa
2
RETIRE LA PARRILLA FRONTAL
(SI ESTÁ PEGADA)
Retire la cinta de envío si todavía está pegada.
En los modeles con
parrilla de entrada
elevadiza, levántela y
retire el tornillo detrás
de él (si está presente),
lo que sostiene la
parrilla en su lugar.
En algunos
modelos, abra la
parrilla de entrada
desde los lados
y remuévela.
Remueva el
tornillo, si existe alguno.
3
17
3
⁄
8
″
mín.
28
1
⁄
2
″
a 39
″
(con paneles de acordeón)
24
1
⁄
2
″
mín.
(sin paneles de acordeón)
A