GE ArcamEBM Spectra H, Руководство по эксплуатации

Страница: 108 / 142

7
Software
Overview
7 7..1 1..3 3..3 3 B Bu uiilld d S Se ettu up p
The B Bu uiilld d tab is found behind the Menu button. This is where the prepared build
files are selected and loaded.
The Build Status (right side panel) gives an overview of
the setup progress.
When all four indicators are green, everything on the
build tab, necessary for a new build, has been
completed.
E En ntte err P Po ow wd de err B Ba attcch h — Allows the user to input the
powder batch number, will show the last entered batch.
N No otte e
Green indicators indicate that all the neces-
sary steps have been completed. However, it
does not guarantee that the parameters and
the build itself are correct.
The B Bu uiilld d P Prro ojje ecctt button will load a zipped collection of clf files and themes in a build. All the information
required to start a build.
The B Bu uiilld d F Fiille e button loads a zipped collection of clf files, which requires you to go to the Process tab and
manually assign the themes for a build.
7 7..1 1..3 3..3 3..1 1 B Bu uiilld d P Prro ojje ecctt
A build project (*.abp) can be saved when a build, a start plate theme, a materi-
al theme, process themes and models have been completely configured.
The build project will then contain all the information needed to run an identical
copy of that build.
N No otte e
If the settings in any of the themes are changed at any time, the original build project will not
change. The build project M
MU US ST T be saved to contain the new settings.
7.1.3.3.1.1 Save A Build Project
When the Build and the Process Setup is complete, the current settings can be stored as a Build Project.
1. Press M Me en nu u.
2. Press the B Bu uiilld d tab.
104 02 OM-710430 en-GB