For normal
1. Set the Selector Switch at HIGH
COOL.
2. Set the Thermostat Control at
the desired number (usually 5-7 is a
good starting position). If room
temperature is not satisfactory after
a reasonable time, set the Thermostat
Control at a higher number for a
cooler room or at a lower number
for a warmer room.
3. Set the Energy Saver Switch at
NORMAL position for continuous
fan operation or at SAVE position
to automatically cycle the fan on
and off with the compressor.
4. Set the Ventilation Control at
CLOSE except for brief periods
when you want to exhaust room air
to the outside.
For maximum
1. Set the Selector Switch at HIGH
COOL.
2.
Thermostat Control to 10.
3. Set the Ventilation Control at
CLOSE.
4. Set the Energy Saver Switch at
the NORMAL position.
For quieter operation
1. Set the Selector Switch at LOW
COOL position.
2.
the Thermostat Control to
the desired number.
When the Thermostat Control is
set on 9 or 10 and the Fan is set on
low speed, moisture may freeze on
the coils and prevent the unit from
cooling. If this happens, set the Fan
at high
and set the Thermostat
Control to a lower number.
3. Set the Ventilation Control at
CLOSE.
4. Set the Energy Saver Switch at
the NORMAL position.
Note: When the Energy Saver
Switch is at the SAVE position,
changes in the sound level may be
more noticeable than when it’s at
the NORMAL position.
For
operation
During the cooler evening hours,
we recommend that you set the
Selector Switch at LOW COOL
for very quiet operation and the
Thermostat Control at mid-range
(5 or 6). Set the Ventilation Control
at CLOSE and the Energy Saver
Switch at NORMAL or SAVE
position.
For extreme temperatures
For greatest economy and best
performance, we suggest you set
the Selector Switch at HIGH
COOL in extremely hot weather.
5
To adjust air direction
Up and down
UP-AND-DOWN
AIR
The
air-on
louvers
are controlled by fingertip pressure
on the louvers. They regulate air
discharge upward, downward or
straight out.
Side to side
Two separate
of side-to-side
air direction louvers have separate
tabs to let you direct discharged air
to the right, to the left, or straight
ahead.