Operating Your Air Conditioner Controls
SELECTOR
LOW COOL
o
THERMOSTAT
3
2
OPEN VENT CLOSE
(ON
THE LOWER
RIGHT SIDE
OF THE DISCHARGE GRILLE)
Selector Switch
Ventilation Control
OFF turns
conditioner
FAN ONLY permits
speed
operation without cooling.
in NORMAL
LOW COOL permits cooling with
low fan speed operation.
COOL permits cooling with
medium fan speed operation.
HIGH COOL permits cooling
with high
speed operation.
Thermostat Control
When
move the Thermostat
Control to the desired setting, the
thermostat will automatically
control the temperature of the
indoor air. The higher the number
selected, the cooler the indoor air
will become.
When you move the Ventilation
Control to CLOSE, the vent door
is closed and only the air inside
the room will be circulated and
conditioned. Moving the control to
OPEN opens the vent door,
allowing a small amount of indoor
to be exhausted from the room.
However, cooling effectiveness is
reduced when this control is set at
OPEN, so we suggest you don’t
keep it there long—especially in
hot, humid weather.
Energy Saver Fan
Cycle Switch
ENERGY
SAVER
NORMAL
SAVE
This switch controls the
operation.
NORMAL setting allows
continuous
function, circulating
air even when the compressor has
cycled off and the thermostat
setting has been reached. This
setting is recommended for
maximum comfort.
SAVE setting lets the fan cycle on
and off with the compressor during
cooling. The fan stops when the
thermostat setting is satisfied. This
setting results in
off time
wider variations of room
temperature
humidity. This
setting is normally used when the
room is unoccupied.
4