GE AKTA avant, Руководство пользователя

Страница: 226 / 538

5.9.1 Create a method
Introduction
The predefined methods are built up using phases, where each phase corresponds to
a step in a chromatography run with a number of properties associated with that phase.
See UNICORN Method Manual for more information about method structure, definitions
and concepts of methods in UNICORN.
UNICORN methods are always created specifically for a designated system
and thus also for a specific system type. However, it is often useful to convert
a method that was originally created for a system of one type, for use with a
system of another type. For example it is possible to convert a method created
for ÄKTA avant 25 to ÄKTA avant 150. See UNICORN Method Manual. Note:
Predefined methods
There are several predefined methods to choose from. All the predefined methods are
listed in the following topics.
The predefined methods available for each system are defined by the Instrument Con-
figuration. See Section 9.6 Predefined methods and phases, on page 449 for more informa-
tion about each method.
Purification methods
• Affinity Chromatography (AC)
•
Anion Exchange Chromatography (AIEX)
•
Cation Exchange Chromatography (CIEX)
•
Chromatofocusing (CF)
• Desalting
• Gel filtration (GF)
•
Hydrophobic Interaction Chromatography (HIC)
•
Manual Loop Fill
•
Reversed Phase Chromatography (RPC)
Maintenance methods
•
Column CIP
•
Column Performance Test
•
Column Preparation
226 ÄKTA avant User Manual 29035184 AE
5 Operation
5.9 Create a method and perform a run
5.9.1 Create a method