GE AKLK18, Руководство пользователя

Страница: 10 / 40

10
49-5000525 Rev. 0
INST
ALLA
TION INSTRUCTIONS
Installation Instructions
3. PREPARE THE AIR
CONDITIONER
A. Remove the front panel. Tilt the front intake
forward and then remove filter. Remove the
intake and set aside.
B. Remove the four screws holding the front panel
to the unit. Save these screw for later.
C. Remove the panel from the unit by pressing on
the outer case to release the plastic tabs, then
lifting up on the panel.
1. WINDOW REQUIREMENTS
• These instructions are for a standard
double-hung window. You will need to modify
them for other types of windows.
• The air conditioner can be installed without the
side curtain panels if needed to fit in a narrow
window. See the window opening dimensions.
• All supporting parts must be secured to firm
wood, masonry or metal.
• The electrical outlet must be within reach of
the power cord.
• Follow the dimensions in the table and
illustration for your model.
2. STORM WINDOW
REQUIREMENTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will
keep it from draining properly. To adjust for this,
attach a piece of wood to the sill.
WOOD PIECES
WIDTH: 2
Ǝ
LENGTH: Long enough to fit inside the window
frame.
THICKNESS: To determine the thickness,
SODFHDSLHFHRIZRRGRQWKHVLOOWRPDNHLWƎ
higher than the top of the storm window frame
or the vinyl frame.
Attach securely with nails or screws provided
by the installer.
A
(With side curtain panels)
B
ƎKLJKHU
than storm
window
frame
Storm window
frame
Wood
Sill
ƎKLJKHU
than vinyl frame
(on some windows)
Vinyl frame
Models A B
$./. ´PLQ ´´
AKLK24 ´PLQ ´´
Front Panel
Intake