![background image](http://html1.mh-extra.com/html/ge/air-116/air-116_service-manual-and-installation-manual_4299617039.webp)
36
Malfunction Analysis
12
When set the breaker to ON, it
will trip off at once.
Breaker tripped
or fuse burnt out
Air conditioner can not start up
When turn on the unit, the breaker
will trip in a few minutes
Test the insulative resistance for earthing
to confirm whether the unit has current
leakage or not
The circuit or the part of the air conditioner has
malfunction. They heat and break the insulation and
lead to short circuit or creepage. Measure the insu-
lation resistance or eliminate the malfunction one by
one. If the breaker itself has malfunction, then re-
place the breaker.
The transformer connection is loose or has bad
contact or the transformer has malfunction
Fasten the connection wire and measure the output
voltage of the transformer. If it is defective, then
replace the transformer.
No power supply circuit
Check the power supply circuit.
The power plug is not inserted well or
has bad contact
Check and insert the plug well and
make the contact firm.
The controller fuse blows.
The air conditioner does
not react after it is
powered(after the plug
is inserted, the buzzer
does not sound and the
remote startup has no
response)
T h e r e m o t e c o n t r o l l e r h a s
malfunction.
The receiver is loose or has bad contact.
The receiver is damaged.
The remote control-
ler does not receive
signals(after it is
powered, the buzzer
will sound, unless it
has malfunction)
Replace the controller fuse.
The controller is damaged.
Replace the controlle
The power of the remote controller is
not enough.
Replace the battery
First, press the manual switch button”AUTO”, if
there is no response, check based on the above
methods. If it runs normally after pressing the
button, check again whether the installation posi-
tion and the connection wire of the reception head
is correct. If it is correct, then replace the receiver
or the remote controller.
The voltage is too low.
Check the voltage. If it is lower than 10£¥ of the rated
voltage, check the cause, improve the power supply
condition and add the stabilized voltage power supply.
Blockage or crack of water discharge
pipe
Replace the water discharge pipe.
Re-wrap and make it tight
Wrap of refrigerant pipe joint is not
close enough
Water Leakage
All manuals and user guides at all-guides.com
Содержание AIR 116
Страница 2: ...All manuals and user guides at all guides com...
Страница 3: ...All manuals and user guides at all guides com...
Страница 27: ...24 9 Exploded View Exploded View Indoor unit spare part 9 1 All manuals and user guides at all guides com...
Страница 29: ...26 9 3 Exploded View Outdoor Unit Spare parts All manuals and user guides at all guides com...