background image

Care and cleaning of the air conditioner.

Air Filter

The air filter behind the inlet grille should be
checked and cleaned at least every 30 days or 
more often if necessary.

To open the inlet grille and remove the air filter:

Grasp both sides of the inlet grille and pull
forward. The inlet grille will pivot forward 
and down to reveal the air filter.

Remove the filter by grasping it by the frame
and pulling it out.

Clean the filter with warm, soapy water. Rinse
and let the filter dry before replacing it.

Replace the filter and close the inlet grille.

CAUTION:

DO NOT operate the air

conditioner without a filter because dirt and lint will 
clog it and reduce performance.

4

3

2

1

Outdoor Coils

The coils on the outdoor side of the air conditioner
should be checked regularly. If they are clogged
with dirt or soot they may be professionally steam
cleaned, a service available through your GE
service outlet.

Grille and Case

Turn the air conditioner off and remove the
plug from the wall outlet before cleaning. 

To clean, use water and a mild detergent. 
Do not use bleach or abrasives.

C

onsumer Support

Tr

oubleshooting T

ips

Installation Instructions

Care and Cleaning

Operating Instructions

Safety Instructions

6

Air filter

Inlet grille

Содержание AGX08

















Отзывы: