GE AF-600 FP Series, Руководство по эксплуатации

Страница: 104 / 138

6.2.20 AP-## HVAC Appl. Param.
Par. No. # Parameter description Default value 4-set-up Change
during
operation
Conver-
sion
index
Type
AP-0#
AP-00 External Interlock Delay 0 s All set-ups TRUE 0 Uint16
AP-2#
AP-20 Low Power Auto Set-up [0] Off All set-ups FALSE - Uint8
AP-21 Low Power Detection [0] Disabled All set-ups TRUE - Uint8
AP-22 Low Speed Detection [0] Disabled All set-ups TRUE - Uint8
AP-23 No-Flow Function [0] Off All set-ups TRUE - Uint8
AP-24 No-Flow Delay 10 s All set-ups TRUE 0 Uint16
AP-26 Dry Pump Function [0] Off All set-ups TRUE - Uint8
AP-27 Dry Pump Delay 10 s All set-ups TRUE 0 Uint16
AP-3#
AP-30 No-Flow Power 0.00 kW All set-ups TRUE 1 Uint32
AP-31 Power Correction Factor 100 % All set-ups TRUE 0 Uint16
AP-32 Low Speed [RPM] ExpressionLimit All set-ups TRUE 67 Uint16
AP-33 Low Speed [Hz] ExpressionLimit All set-ups TRUE -1 Uint16
AP-34 Low Speed Power [kW] ExpressionLimit All set-ups TRUE 1 Uint32
AP-35 Low Speed Power [HP] ExpressionLimit All set-ups TRUE -2 Uint32
AP-36 High Speed [RPM] ExpressionLimit All set-ups TRUE 67 Uint16
AP-37 High Speed [Hz] ExpressionLimit All set-ups TRUE -1 Uint16
AP-38 High Speed Power [kW] ExpressionLimit All set-ups TRUE 1 Uint32
AP-39 High Speed Power [HP] ExpressionLimit All set-ups TRUE -2 Uint32
AP-4#
AP-40 Minimum Run Time 10 s All set-ups TRUE 0 Uint16
AP-41 Minimum Sleep Time 10 s All set-ups TRUE 0 Uint16
AP-42 Wake-up Speed [RPM] ExpressionLimit All set-ups TRUE 67 Uint16
AP-43 Wake-up Speed [Hz] ExpressionLimit All set-ups TRUE -1 Uint16
AP-44 Wake-up Ref./FB Difference 10 % All set-ups TRUE 0 Int8
AP-45 Setpoint Boost 0 % All set-ups TRUE 0 Int8
AP-46 Maximum Boost Time 60 s All set-ups TRUE 0 Uint16
AP-5#
AP-50 End of Curve Function [0] Off All set-ups TRUE - Uint8
AP-51 End of Curve Delay 10 s All set-ups TRUE 0 Uint16
AP-6#
AP-60 Broken Belt Function [0] Off All set-ups TRUE - Uint8
AP-61 Broken Belt Torque 10 % All set-ups TRUE 0 Uint8
AP-62 Broken Belt Delay 10 s All set-ups TRUE 0 Uint16
AP-7#
AP-70 Compressor Start Max Speed [RPM] ExpressionLimit All set-ups TRUE 67 Uint16
AP-71 Compressor Start Max Speed [Hz] ExpressionLimit All set-ups TRUE -1 Uint16
AP-72 Compressor Start Max Time to Trip 5.0 s All set-ups TRUE -1 Uint8
AP-73 Starting Acceleration Time ExpressionLimit 2 set-ups TRUE -2 Uint32
AP-75 Short Cycle Protection [0] Disabled All set-ups TRUE - Uint8
AP-76 Interval between Starts ExpressionLimit All set-ups TRUE 0 Uint16
AP-77 Minimum Run Time 0 s All set-ups TRUE 0 Uint16
AP-8#
AP-80 Flow Compensation [0] Disabled All set-ups TRUE - Uint8
AP-81 Square-linear Curve Approximation 100 % All set-ups TRUE 0 Uint8
AP-82 Work Point Calculation [0] Disabled All set-ups TRUE - Uint8
AP-83 Speed at No-Flow [RPM] ExpressionLimit All set-ups TRUE 67 Uint16
How to Program AF-600 FP High Power Operating Instructions
103
6 6