Selector
OFF turns air conditioner off.
LO FAN permits low fan speed
operation without cooling.
MED FAN permits medium fan
speed operation without cooling.
HI FAN permits high fan speed
operation without cooling.
LO COOL
cooling
with low fan speed operation.
MED COOL permits cooling
with medium fan speed operation.
HI COOL permits cooling
with high fan speed operation.
2
(
5
4’\
6
THERMOSTAT
Control
you turn the Thermostat
Control to the desired setting, the
thermostat will automatically
control the temperature of the
indoor air. The higher the number
selected, the cooler the indoor air
will be.
OPEN
Ventilation Control
You move the Ventilation
to CLOSED, the vent door
is closed and only the air inside the
will be circulated and
conditioned. Moving the control to
OPEN opens the vent door,
allowing a small amount of indoor
air to k-exhausted from the room.
However, cooling effectiveness is
reduced when this control is set at
OPEN, so we suggest you don’t
keep it there
in
hot, humid weather.
Freezing up
If you notice that your air conditioner is not cooling as it should, it may be
that ice has formed on the cooling coils. The ice blocks air flow and stops
the unit from cooling the room. This “freezing up” is a
condition
that most often occurs at night when the
is set at a higher
number and the Selector is set on LO COOL.
To correct the condition, set the Selector at HI FAN or HI COOL
and move the Thermostat to the warmest setting.
Outside air
temperature
dropping
4