![background image](http://html1.mh-extra.com/html/ge/aem12av/aem12av_owners-manual-and-installation-instructions_4174689010.webp)
Installation Instructions
6
A
B
2 Frame locking brackets
PREPARE THE WINDOW
Cut the window seal (2 long strips) to the proper
length. Peel off the backing and attach the seal to
the underside of the window sash. One attached
to sash and one attached to sill.
5
3 Screws
C
10
INSTALL THE AIR CONDITIONER IN
THE WINDOW
Place the air conditioner on the sill with the
bottom mounting rail against its back edge.
Center it and close the window securely behind
the top mounting rail.
It should be level or slightly tilted to the outside.
Use a level; about a 1/3 bubble will be the correct
case slant to the outside.
Extend the left and right accordion panels to
the vertical window sashes and attach 3 screws
through the holes in the upper panels, as
appropriate.
Install the frame locking brackets between the
bottom of the accordion panel and the window
sill. Attach with 2 screws.
NOTE:
To prevent the
window sill from splitting, drive the pilot holes
before driving the screws.
Sealing Strip
(with adhesive)
PREPARE THE AIR CONDITIONER
FRQW
Remove the backing from the accordion
seal (two short strips). Stick one sealing strip
respectively on the left side and right side of
the accordion panels, as shown.
Slide the free end of the accordion panel into
the side panel rails. Slide the panel down. Be
sure to leave enough space to slip the top
and bottom of the frame into the rails on the
cabinet.
NOTE:
There is a right and a left accordion
panel. Be sure to use the proper panel for each
side.
Slide the left and right accordion panels into
the top and bottom mounting rails.
4
C
Top left
Top right
Top mounting rail
Bottom mounting rail
D
Top mounting rail
Bottom mounting rail
E