![background image](http://html1.mh-extra.com/html/ge/aeh10al/aeh10al_owners-manual-and-installation-instructions_4125149004.webp)
4
About the controls on the air conditioner
Controls
Power Pad
Turns air conditioner on and off. When
turned on, the display will show the room
temperature.
Display
Shows the room temperature or time
remaining on the Delay timer. Shows the
Set
temperature while setting the temperature in
Cool
or
Energy Saver
modes. The
Set
light will
turn on while setting.
NOTE:
The display will change to show the
room temperature after settings have been
made. To recall the
Set
temperature, press the
Temp Increase
▲
or
Decrease
▼
pads.
Temp Increase
▲
/Decrease
▼
Pads
Use to set temperature when in
Cool
or
Energy
Saver
mode. The
Set
light will turn on while
setting.
Delay Timer Increase
▲
(+) /Decrease
▼
(–)
Pads
Each touch of the
Increase
▲
/ Decrease
▼
pads on the unit or the
Increase
+
/ Decrease
–
pads on the remote control will set the delay
time when using the
Delay 1–24hr
timer (
).
The
Set
light will turn on while setting.
Fan Speed Pads
Use to set the fan speed to
Low, Med, High
or
Auto
on the unit
. NOTE:
On the remote
control, use the fan speed
Increase
+
/
Decrease
–
pads to set the fan speeds to
Low
,
Med
or
High
. Use the
Auto
pad to turn
Auto
fan on.
Mode Pad
Use to set the air conditioner to
Cool
,
Energy
Saver
or
Fan Only
mode.
Delay Pads
Delay ON—
When the air conditioner is off, it
can be set to automatically come on in 1 to 24
hours at its previous mode and fan settings.
Delay OFF—
When the air conditioner is on,
it can be set to automatically turn off in 1 to
24 hours.
How to set:
Press the
Delay 1–24hr
pad on the unit or
the
pad on the remote control. Each touch
of the
Increase
▲
/ Decrease
▼
pads on the
unit or the
Increase
+
/ Decrease
–
pads on
the remote control will set the timer in
1-hour intervals. The
Set
light will turn on
while setting.
To review the remaining time on the
Delay
1–24hr
timer, press the
Delay 1–24hr
pad on the
unit or the
pad on the remote control. Use
the
Increase
▲
/ Decrease
▼
pads on the unit
or the
Increase
+
/ Decrease
–
pads on the
remote control to set a new time if desired.
To cancel the timer,
press the
Delay 1–24hr
pad
until the light on the
Delay 1–24hr
pad goes off.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Mode
Auto
Power
Temp
Fan
Fa
n -
Fan
+
Delay
Remote Control
Delay timer Increase
Auto Fan on/off
Fan speed Increase
Unit power on/off
The display always shows the
room temperature except when
setting the Set temperature or
the Delay timer.
Air Conditioner Controls
Light indicates the
delay timer is set.
Light indicates the unit
is in the temperature or
delay time Set mode.
In the case of a power outage or interruption, the
unit will automatically re-start in the settings last
used after the power is restored. If the
Delay 1–24hr
feature was set, it will resume countdown. You may
need to set a new time if desired.
Power Outage Recovery Feature
Safety Instructions
Operating
Instructions
Care and Cleaning
Installation
Instructions
Tr
oubleshooting
Tips
Consumer Support
Delay 1–24hr
Delay timer
Decrease
Mode select
Fan speed
Decrease
Temperature
set Increase
and Decrease